High precision glue dispensing machine TG40
Category:Semi automatic gluing machine
Brand:D&H
Model:TG-40
Applications:Capacitor, power supply, transformers, ignition coil, ignition coil, ballast and other products which need to be glued
Suitable Material:Two-component liquid ,Epoxy, PU
Video
Features
1、High speed and high efficiency
2、Easy to use
3、Desktop design, easy to place
| Mixing ratio | 100:100—100:10 optional |
| Speed |
|
| Precision | ±2%（glue potting）±2%（glue mixing） |
| Program memory | 10 pcs |
| Input air pressure | 0.5MPa—0.7MPa |
| Glue viscosity /25℃ | 1cps~30000cps（Part of the glue can be heated to reduce the viscosity） |
| Operation mode | Manual/ Auto |
| Ratio control | PLC/Single plunger pump |
| Flow control | Digital input |
| Automatic control system | PLC/ Touch screen (program programming, modification, storage, etc.) |
| Glue release control system | AB adhesive suction valve to realize independent operation of AB adhesive |
| Mixing mode | Dynamic, static, optional, instant mixing, easy to clean |
| storage cylinder system | Transparent plastic bucket 1L |
| Power supply | 220V/50Hz/1200W（不加热时） |
| Outer dimension | 800mm×475 mm×900mm |
Liquid A & B are kept in two tanks separately. There are two sets of metering pumps inside the machine, draining out liquids individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data.
Glue dispensing machine
1.Pump adopts single cylinder plunger pump, A pump capacity is 40ml, B pump capacity is 4ml;
2.Tank/ pump / valve are connected directly, there is no pipeline connection between pump and valve,
3.Precision is high, 40g error is positive and negative 0.05g;
4.Weighing module is configured to detect the actual glue output of AB and realize closed loop control;
5.Pump outlet is at the bottom of pump cavity, it is easy to clean the whole pump completely when the pump is not removed.
1.Pump adopts single cylinder plunger pump, A pump capacity is 40ml, B pump capacity is 4ml;
2.Tank/ pump / valve are connected directly, there is no pipeline connection between pump and valve,
3.Precision is high, 40g error is positive and negative 0.05g;
4.Weighing module is configured to detect the actual glue output of AB and realize closed loop control;
5.Pump outlet is at the bottom of pump cavity, it is easy to clean the whole pump completely when the pump is not removed.